This study evaluated the shear bond strength of Rexillium III (Jeneric Pentron, Wallingford, CT) to enamel using various resin composite luting systems. Cast alloy cylinders (3.9 mm x 6.0 mm) were bonded with each cement to human molar buccal enamel surfaces 9n = 8). The enamel was etched using a 35% phosphoric acid solution for 30 seconds. Bonded specimens were stored in distilled water for 7 days at 37 degrees C and thermocycled (1,500 cycles) in 5 degrees C and 55 degrees C water baths (1-minute dwell time). Specimens were randomly tested in shear using a crosshead speed of 0.5 mm per minute. Use of a one-way analysis of variance (P < .001) and the Ryan-Einot-Gabriel-Welsh multiple range test showed significant differences between several of the resin cements. Panavia exhibited a significantly higher shear bond strength than any of the other cements tested (P < .05)